iPhone Sound Level Meter

Discus your Audio Software here
Post Reply
User avatar
Paramvir Singh
Hero Member
Hero Member
Posts: 677
Joined: Thu Nov 23, 2006 12:54 pm
Location: Mumbai

iPhone Sound Level Meter

Post by Paramvir Singh »

Thanks to Dara's discovery, I found an iPhone Sound Level Meter


Due to popular demand, SoundMeter has arrived to turn your iPhone into a handheld sound level meter (SLM). The iPhone’s built-in and headset microphones exhibit a remarkably flat frequency response, making them suitable for basic sound level measurements. However, due to sample rate limitations and frequency response degradation, SoundMeter is not recommended for use with the built-in microphone of first-generation iPhones.

Even though default sensitivity values are included for the iPhone’s built-in and headset microphones, for best results, SoundMeter should be calibrated before use. Sound levels may be off by 6 dB or more when using the default microphone sensitivity.

Note: SoundMeter has not been shown to meet ANSI or IEC standards for sound level meters.


* Measure time-weighted and equivalent sound levels.
* Employ Flat, A, or C frequency weighting.
* Time-weighted measurement options include Fast, Slow, and Impulse weightings.
* Keep track of peak and maximum sound levels.
* Save high-resolution sound level display images to the iPhone's Camera Roll photo album. Descriptive text may be added to the image before it is saved.
* Calibration controls enable automatic calibration, relative to a calibrated sound level meter, or manual entry of the microphone sensitivity.
* SoundMeter supports rotating the iPhone upside down, so the built-in microphone sits on top of the device when measuring sound levels.
* With the iPhone’s built-in microphone, SoundMeter can measure peak sound levels of up to approximately 105 dB. With the iPhone’s included headset microphone, SoundMeter can measure peak sound levels of up to approximately 100 dB.
Post Reply